ZyXEL Communications 91-009-073003B manual 624

Chapter 39 AAA Server

Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen.

Figure 359 Configuration > Object > AAA Server > RADIUS

The following table describes the labels in this screen.

Table 192 Configuration > Object > AAA Server > RADIUS

LABEL	DESCRIPTION
Add	Click this to create a new entry.
Edit	Double-click an entry or select it and click Edit to open a screen where
	you can modify the entry’s settings.
Remove	To remove an entry, select it and click Remove. The ZyWALL confirms
	you want to remove it before doing so.
Object	Select an entry and click Object References to open a screen that
References	shows which settings use the entry. See Section 11.3.2 on page 230 for
	an example.
#	This field displays the index number.
Name	This is the name of the RADIUS server entry.
Server	This is the address of the AD or LDAP server.
Address
Base DN	This specifies a directory. For example, o=ZyXEL, c=US.
Host	Enter the IP address (in dotted decimal notation) or the domain name (up
	to 63 alphanumeric characters) of a RADIUS server.
Authentication	The default port of the RADIUS server for authentication is 1812.
Port	You need not change this value unless your network administrator
	instructs you to do so with additional information.
Key	Enter a password (up to 15 alphanumeric characters) as the key to be
	shared between the external authentication server and the ZyWALL.
	The key is not sent over the network. This key must be the same on the
	external authentication server and the ZyWALL.
Timeout	Specify the timeout period (between 1 and 300 seconds) before the
	ZyWALL disconnects from the RADIUS server. In this case, user
	authentication fails.
	Search timeout occurs when either the user information is not in the
	RADIUS server or the RADIUS server is down.
Apply	Click Apply to save the changes.
Reset	Click Reset to return the screen to its last-saved settings.

624
	ZyWALL USG 50 User’s Guide