Chapter 21 Authentication Policy

Figure 213 Configuration > Auth. Policy > Add

The following table gives an overview of the objects you can configure.

Table 102 Configuration > Auth. Policy > Add

LABEL

DESCRIPTION

Create new

Use to configure any new settings objects that you need to use in this

Object

screen.

 

 

Enable Policy

Select this check box to activate the authentication policy. This field is

 

available for user-configured policies.

 

 

Description

Enter a descriptive name of up to 60 printable ASCII characters for the

 

policy. Spaces are allowed. This field is available for user-configured

 

policies.

 

 

User

Use this section of the screen to determine which traffic requires (or does

Authentication

not require) the senders to be authenticated in order to be routed.

Policy

 

 

 

Source

Select a source address or address group for whom this policy applies.

Address

Select any if the policy is effective for every source. This is any and not

 

configurable for the default policy.

 

 

Destination

Select a destination address or address group for whom this policy

Address

applies. Select any if the policy is effective for every destination. This is

 

any and not configurable for the default policy.

 

 

354

 

ZyWALL USG 50 User’s Guide