Chapter 4 Installation Setup Wizard

The screens vary depending on the encapsulation type. Refer to information provided by your ISP to know what to enter in each field. Leave a field blank if you don’t have that information.

Note: Enter the Internet access information exactly as your ISP gave it to you.

Figure 27 Internet Access: Step 1

•I have two ISPs: Select this option to configure two Internet connections. Leave it cleared to configure just one. This option appears when you are configuring the first WAN interface.

•Encapsulation: Choose the Ethernet option when the WAN port is used as a regular Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection according to the information from your ISP.

•WAN Interface: This is the interface you are configuring for Internet access.

•Zone: This is the security zone to which this interface and Internet connection belong.

•IP Address Assignment: Select Auto if your ISP did not assign you a fixed IP address.

Select Static if the ISP assigned a fixed IP address.

4.1.2Internet Access: Ethernet

This screen is read-only if you set the previous screen’s IP Address Assignment field to Auto. Use this screen to configure your IP address settings.

60

 

ZyWALL USG 50 User’s Guide