Chapter 7 Tutorials

1Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry. Configure the RADIUS server’s address authentication port (1812 if you were not told otherwise), key, and click Apply.

Figure 73 Configuration > Object > AAA Server > RADIUS > Add

2Click Configuration > Object > Auth. method. Double-click the default entry. Click the Add icon. Select group radius because the ZyWALL should use the specified RADIUS server for authentication. Click OK.

Figure 74 Configuration > Object > Auth. method > Add

3Click Configuration > Auth. Policy. In the Authentication Policy Summary section, click the Add icon.

4Set up a default policy that forces every user to log in to the ZyWALL before the ZyWALL routes traffic for them. Select Enable. Set the Authentication field to required, and make sure Force User Authentication is selected. Keep the rest of the default settings, and click OK.

 

125

ZyWALL USG 50 User’s Guide