ZyXEL Communications 91-009-073003B manual 735

Chapter 46 Log and Report

The following table describes the fields in this screen.

Table 232 Configuration > Log & Report > Log Setting > Active Log Summary

LABEL	DESCRIPTION
System log	Use the System Log drop-down list to change the log settings for all of
	the log categories.
	disable all logs (red X) - do not log any information for any category
	for the system log or e-mail any logs to e-mail server 1 or 2.
	enable normal logs (green check mark) - create log messages and
	alerts for all categories for the system log. If e-mail server 1 or 2 also
	has normal logs enabled, the ZyWALL will e-mail logs to them.
	enable normal logs and debug logs (yellow check mark) - create log
	messages, alerts, and debugging information for all categories. The
	ZyWALL does not e-mail debugging information, even if this setting is
	selected.
E-mail Server	Use the E-Mail Server 1 drop-down list to change the settings for e-
1	mailing logs to e-mail server 1 for all log categories.
	Using the System Log drop-down list to disable all logs overrides your
	e-mail server 1 settings.
	enable normal logs (green check mark) - e-mail log messages for all
	categories to e-mail server 1.
	enable alert logs (red exclamation point) - e-mail alerts for all
	categories to e-mail server 1.
E-mail Server	Use the E-Mail Server 2 drop-down list to change the settings for e-
2	mailing logs to e-mail server 2 for all log categories.
	Using the System Log drop-down list to disable all logs overrides your
	e-mail server 2 settings.
	enable normal logs (green check mark) - e-mail log messages for all
	categories to e-mail server 2.
	enable alert logs (red exclamation point) - e-mail alerts for all
	categories to e-mail server 2.
Remote Server	For each remote server, use the Selection drop-down list to change the
1~4	log settings for all of the log categories.
	disable all logs (red X) - do not send the remote server logs for any log
	category.
	enable normal logs (green check mark) - send the remote server log
	messages and alerts for all log categories.
	enable normal logs and debug logs (yellow check mark) - send the
	remote server log messages, alerts, and debugging information for all
	log categories.
#	This field is a sequential value, and it is not associated with a specific
	address.
Log Category	This field displays each category of messages. It is the same value used
	in the Display and Category fields in the View Log tab. The Default
	category includes debugging messages generated by open source
	software.

	735
ZyWALL USG 50 User’s Guide