Chapter 23 IPSec VPN

Table 112 Configuration > VPN > IPSec VPN > VPN Connection (continued)

LABEL

DESCRIPTION

Status

The activate (light bulb) icon is lit when the entry is active and dimmed

 

when the entry is inactive.

 

The connect icon is lit when the interface is connected and dimmed when

 

it is disconnected.

 

 

Name

This field displays the name of the IPSec SA.

 

 

VPN Gateway

This field displays the associated VPN gateway(s). If there is no VPN

 

gateway, this field displays “manual key”.

 

 

Encapsulation

This field displays what encapsulation the IPSec SA uses.

 

 

Algorithm

This field displays what encryption and authentication methods,

 

respectively, the IPSec SA uses.

 

 

Policy

This field displays the local policy and the remote policy, respectively.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

23.2.1 The VPN Connection Add/Edit (IKE) Screen

The VPN Connection Add/Edit Gateway screen allows you to create a new VPN connection policy or edit an existing one. To access this screen, go to the Configuration > VPN Connection screen (see Section 23.2 on page 378), and click either the Add icon or an Edit icon. If you click the Add icon, you have to select a specific VPN gateway in the VPN Gateway field before the following screen appears.

380

 

ZyWALL USG 50 User’s Guide