Chapter 42 ISP Accounts

The following table describes the labels in this screen.

Table 204 Configuration > Object > ISP Account > Edit

LABEL

DESCRIPTION

Profile Name

This field is read-only if you are editing an existing account. Type in the

 

profile name of the ISP account. The profile name is used to refer to the

 

ISP account. You may use 1-31 alphanumeric characters,

 

underscores(_), or dashes (-), but the first character cannot be a

 

number. This value is case-sensitive.

 

 

Protocol

This field is read-only if you are editing an existing account. Select the

 

protocol used by the ISP account. Options are:

 

pppoe - This ISP account uses the PPPoE protocol.

 

pptp - This ISP account uses the PPTP protocol.

 

 

Authentication

Use the drop-down list box to select an authentication protocol for

Type

outgoing calls. Options are:

 

CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested

 

by this remote node.

 

CHAP - Your ZyWALL accepts CHAP only.

 

PAP - Your ZyWALL accepts PAP only.

 

MSCHAP - Your ZyWALL accepts MSCHAP only.

 

MSCHAP-V2- Your ZyWALL accepts MSCHAP-V2 only.

 

 

Encryption

This field is available if this ISP account uses the PPTP protocol. Use the

Method

drop-down list box to select the type of Microsoft Point-to-Point

 

Encryption (MPPE). Options are:

 

nomppe - This ISP account does not use MPPE.

 

mppe-40- This ISP account uses 40-bit MPPE.

 

mppe-128- This ISP account uses 128-bit MMPE.

 

 

User Name

Type the user name given to you by your ISP.

 

 

Password

Type the password associated with the user name above. The password

 

can only consist of alphanumeric characters (A-Z, a-z, 0-9). This field

 

can be blank.

 

 

Retype to

Type your password again to make sure that you have entered is

Confirm

correctly.

 

 

Server IP

If this ISP account uses the PPPoE protocol, this field is not displayed.

 

If this ISP account uses the PPTP protocol, type the IP address of the

 

PPTP server.

 

 

Connection ID

This field is available if this ISP account uses the PPTP protocol. Type

 

your identification name for the PPTP server. This field can be blank.

 

 

Service Name

If this ISP account uses the PPPoE protocol, type the PPPoE service name

 

to access. PPPoE uses the specified service name to identify and reach

 

the PPPoE server. This field can be blank.

 

If this ISP account uses the PPTP protocol, this field is not displayed.

 

 

 

657

ZyWALL USG 50 User’s Guide