Chapter 11 Interfaces

 

Table 62 Configuration > Network > Interface > VLAN (continued)

 

LABEL

DESCRIPTION

 

Object

Select an entry and click Object References to open a screen that shows

 

References

which settings use the entry. See Section 11.3.2 on page 230 for an

 

 

example.

 

 

 

 

#

This field is a sequential value, and it is not associated with any interface.

 

 

 

 

Status

This icon is lit when the entry is active and dimmed when the entry is

 

 

inactive.

 

 

 

 

Name

This field displays the name of the interface.

 

 

 

 

Port/VID

For VLAN interfaces, this field displays

 

 

• the Ethernet interface on which the VLAN interface is created

 

 

• the VLAN ID

 

 

For virtual interfaces, this field is blank.

 

 

 

 

IP Address

This field displays the current IP address of the interface. If the IP address is

 

 

0.0.0.0, the interface does not have an IP address yet.

 

 

This screen also shows whether the IP address is a static IP address

 

 

(STATIC) or dynamically assigned (DHCP). IP addresses are always static

 

 

in virtual interfaces.

 

 

 

 

Mask

This field displays the interface’s subnet mask in dot decimal notation.

 

 

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

 

11.6.2 VLAN Add/Edit

This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP settings, and connectivity check for each VLAN interface. To access this screen, click the Add icon at the top of the Add column or click an Edit icon next to a VLAN interface in the VLAN Summary screen. The following screen appears.

 

249

ZyWALL USG 50 User’s Guide