Chapter 4 Installation Setup Wizard

4.1.3 Internet Access: PPPoE

Note: Enter the Internet access information exactly as given to you by your ISP.

Figure 29 Internet Access: PPPoE Encapsulation

4.1.3.1ISP Parameters

•Type the PPPoE Service Name from your service provider. PPPoE uses a service name to identify and reach the PPPoE server. You can use alphanumeric and - _@$./ characters, and it can be up to 64 characters long.

•Authentication Type - Select an authentication protocol for outgoing connection requests. Options are:

•CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by the remote node.

•CHAP - Your ZyWALL accepts CHAP only.

•PAP - Your ZyWALL accepts PAP only.

•MSCHAP - Your ZyWALL accepts MSCHAP only.

•MSCHAP-V2- Your ZyWALL accepts MSCHAP-V2 only.

•Type the User Name given to you by your ISP. You can use alphanumeric and - _@$./ characters, and it can be up to 31 characters long.

•Type the Password associated with the user name. Use up to 64 ASCII characters except the [] and ?. This field can be blank.

•Select Nailed-Upif you do not want the connection to time out. Otherwise, type the Idle Timeout in seconds that elapses before the router automatically disconnects from the PPPoE server.

62

 

ZyWALL USG 50 User’s Guide