ZyXEL Communications 91-009-073003B 18.2.1 The HTTP Redirect Edit Screen

Chapter 18 HTTP Redirect

Table 94 Configuration > Network > HTTP Redirect (continued)

LABEL	DESCRIPTION
Port	This is the service port number used by the proxy server.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

18.2.1 The HTTP Redirect Edit Screen

Click Network > HTTP Redirect to open the HTTP Redirect screen. Then click the Add or Edit icon to open the HTTP Redirect Edit screen where you can configure the rule.

Figure 199 Network > HTTP Redirect > Edit

The following table describes the labels in this screen.

Table 95 Network > HTTP Redirect > Edit

LABEL	DESCRIPTION
Enable	Use this option to turn the HTTP redirect rule on or off.
Name	Enter a name to identify this rule. You may use 1-31 alphanumeric
	characters, underscores(_), or dashes (-), but the first character cannot
	be a number. This value is case-sensitive.
Interface	Select the interface on which the HTTP request must be received for the
	ZyWALL to forward it to the specified proxy server.
Proxy Server	Enter the IP address of the proxy server.
Port	Enter the port number that the proxy server uses.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving.

334
	ZyWALL USG 50 User’s Guide