Chapter 1 Introducing the ZyWALL

3After attaching both mounting brackets, position the ZyWALL in the rack by lining up the holes in the brackets with the appropriate holes on the rack. Secure the ZyWALL to the rack with the rack-mounting screws.

Figure 2 Rack Mounting

1.3 Front Panel

This section introduces the ZyWALL’s front panel.

Figure 3 ZyWALL Front Panel

1.3.1 Front Panel LEDs

The following table describes the LEDs.

Table 1 Front Panel LEDs

LED

COLOR

STATUS

DESCRIPTION

PWR

 

Off

The ZyWALL is turned off.

 

 

 

 

 

Green

On

The ZyWALL is turned on.

 

 

 

 

 

 

Breathing

The ZyWALL is in power saving mode.

 

 

 

 

 

Red

On

There is a hardware component failure. Shut down

 

 

 

the device, wait for a few minutes and then restart

 

 

 

the device (see Section 1.5 on page 35). If the LED

 

 

 

turns red again, then please contact your vendor.

 

 

 

 

 

33

ZyWALL USG 50 User’s Guide