ZyXEL Communications 91-009-073003B 37.3 The Service Group Summary Screen, 37.2.1 The Service Add/Edit Screen

Chapter 37 Services

37.2.1 The Service Add/Edit Screen

The Service Add/Edit screen allows you to create a new service or edit an existing one. To access this screen, go to the Service screen (see Section 37.2 on page 606), and click either the Add icon or an Edit icon.

Figure 348 Configuration > Object > Service > Service > Edit

The following table describes the labels in this screen.

Table 184 Configuration > Object > Service > Service > Edit

LABEL	DESCRIPTION
Name	Type the name used to refer to the service. You may use 1-31
	alphanumeric characters, underscores(_), or dashes (-), but the first
	character cannot be a number. This value is case-sensitive.
IP Protocol	Select the protocol the service uses. Choices are: TCP, UDP, ICMP, and
	User Defined.
Starting Port	This field appears if the IP Protocol is TCP or UDP. Specify the port
Ending Port	number(s) used by this service. If you fill in one of these fields, the
	service uses that port. If you fill in both fields, the service uses the range
	of ports.
ICMP Type	This field appears if the IP Protocol is ICMP Type.
	Select the ICMP message used by this service. This field displays the
	message text, not the message number.
IP Protocol	This field appears if the IP Protocol is User Defined.
Number	Enter the number of the next-level protocol (IP protocol). Allowed values
	are 0 - 255.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving your changes.

37.3 The Service Group Summary Screen

The Service Group summary screen provides a summary of all service groups. In addition, this screen allows you to add, edit, and remove service groups.

608
	ZyWALL USG 50 User’s Guide