Blaupunkt CD33 Setting the equalizer, Setting the sound stage, Tips, FM/AM/CD/CD changer/AUX

	Tips
ENGLISH	•	EQ disp *
		Displays the current setting of equalizer curve, if the equal-
		izer has been set.
		(See “Setting the equalizer”)
	•	bAS X-BASS
		For enhanced bass centered @ 72 Hz, Blaupunkt’s X-BASS
		function can be set for either each band and CD/CD changer/
		AUX mode. Reduce X-BASS level if your combination of
		speakers and add on amplifires sound distorted at the pre-

Setting the equalizer

You can select an equalizer curve for 4 music types (Rock, Pop, Classic, Jazz).

Selecting the equalizer curve

1.	Press the AUDIO to select the BAS/TRE adjustment mode.
2.	Press the preset button 1 ~ 6/ to select the desired

equalizer curve. “ ” will light on the display window.

Setting the sound stage

You can select/adjust the position of sound stage to best serve a particular seat.

Selecting the sound stage

1.	Press the AUDIO to select the BAL/FAD adjustment mode.
2.	Press the preset button 1 ~ 6/ to select the desired
	sound stage as follows.

	ferred sound level.
•	AU GAIN (AUX gain)
	Adjust the input volume of the external equipment.
	It is displayed only AUX mode.
•	LMt LEVEL (Limit volume)
	Adjust the volume at the time of power on. You can adjust
	with the actual sound.
•	MUt LEVEL (Mute level)
	You can adjust the mute level with the actual sound.

•	1	ROCK
•	2	POP
•	3	CLASSIC
•	4/MIX	JAZZ
•	5/RPT	USER 1
•	6/	USER 2

•1

•2

•3

•4/MIX

•5/RPT

•6/

POS 1 (For the left seat)		B R2	F R4
POS 2 (For the front seat)		B 0	F R4
POS 3	(For the right seat)	B L2	F R4
POS 4	(For the rear seat)	B 0	F F4
POS 5	(For all the seat)	B 0	F 0
POS 6	(For all the seat)	B 0	F 0

• Settings for BASS, TREBLE, LOUDNESS and X-BASS can be

made to each of the following modes independently:

FM/AM/CD/CD changer/AUX

E-4

Adjusting the equalizer curve

You can store and adjust the equalizer settings for frequency and level.

1.	Press the AUDIO to select the BAS/TRE adjustment mode.
2.	Adjust the desired sound characteristics with BAS/TRE/
3.	LOUD/X-BASS.
	Press the		5/RPT or 6/	for more than 2 seconds to store
	the equalizer curve.
	•	5/RPT	USER 1
	•	6/	USER 2
Cancelling the equalizer curve
1.	Press the		AUDIO to display the current equalizer curve.
2.	Press the		MUTE / SENS	while the name of equalizer curve
	blinking to cancel the equalizer curve.
	The “EQ OFF” will blinking for few seconds.

Adjusting the sound stage

1.	Press the AUDIO to select the BAL/FAD adjustment mode.
2.	Adjust the desired sound stage.
3.	Press the desired preset button 1 ~ 6/ for more than

2 seconds to store the desired sound stage.

SacramentoCD33_Eng 4 2/5/03, 4:27 PM