Skil 3700 manual

Warning Labels

WARNING ! THE WARNINGS SHOWN BELOW CAN BE FOUND ON YOUR TOOL. THESE WARNINGS ARE ONLY A CONDENSED FORM OF THE MORE DETAILED SAFETY RULES AND PRECAUTIONS THAT APPEAR IN YOUR OWNER'S MANUAL. THEY SERVE AS A REMINDER OF ALL SAFETY RULES NEEDED FOR SAFE OPERATION OF THIS TABLE SAW.

! WARNING Router Safety

•For your own safety, read and understand table, router and accessory warnings and instructions before use.

•Unplug power cord before assembly, adjustments or changing bit.

•Securely fasten router to table.

•Clamp or bolt complete unit to solid, level surface at a comfortable work height.

•Wear eye and respiratory protection.

•Keep guard in place and functioning.

•Feed workpiece against bit rotation.

•Guide workpiece by fence. Do not "freehand".

•Do not feed workpiece between fence and bit diameter.

•Keep hands away from spinning bit and avoid awkward hand positions.

•Do not stand on table or use as step stool.

! WARNING Sander Safety

•For your own safety, read and understand the manual for the use of this accessory with the workstation.

•Turn OFF and unplug the table saw before setting up the belt sander accessory in workstation. Sander must be OFF and unplugged from power source before assembling to insert plate.

•Securely fasten sander to insert plate then entire assembly to workstation.

•Route cord away from work area.

•Know how to shut off the sander!

•Do not run table saw at the same time as the sander. Turn off sander before returning to table saw operation.

•Wear eye and respiratory protection.

•Do not wear gloves, jewelry, or loose clothing.

•Keep fingers and clothing away from belt and pulleys.

•Support workpiece with miter gage or backstop and worktable.

•Maintain 1/16-inch maximum clearance between table and sanding belt.

•If dust bag is used, empty it frequently to avoid spontaneous combustion of dust particles.

! WARNING Jigsaw Safety

•For your own safety, read and understand tool manual and accessory instructions before each use.

•Disconnect plug from power source before making any assembly, adjustments or changing accessories.

•Wear eye protection.

•Securely fasten jigsaw to insert and fully assembled unit to table.

•Guide workpiece by fence. Do not "freehand" cut.

•Keep fingers away from reciprocating blade and avoid awkward hand positions.

•Use push sticks and fixtures as necessary.

•Do not stare into the laser light source. Laser light can damage your eyes.

11.