3Com 3500 manual Example Script

script 125

Example Script (3500)

This example scripts these tasks to initially configure your system:

■Changes the modem port baud

■Sets the system name

■Assigns an IP address for management

■Verifies the IP connection by pinging the system

■Enables Spanning Tree

■Sets up SNMP trap reporting

#This script performs some start-up configurations.

#Set the modem serial port baud.

#

system serialPort modemSpeed

4800# modem serial port baud

#

#Set the system name

system name

Eng_CoreBuilder_4

#Assign an IP address to the system.

ip interface define

158.101.112.99 # IP address for the system

255.255.0.0	# subnet mask
1	# VLAN interface index

ip interface summary all

#

#Validate access to management workstation

ip ping

158.101.112.26 # management workstation address

#Enable the Spanning Tree Protocol

#

bridge stpState enabled

#

#Configure my node as an SNMP trap destination

snmp trap add

158.101.112.26 # management workstation address

all # turn on all traps

q# no more trap destinations

#

snmp trap display

#