3Com 3500 manual For which you want to view, Summary LSA information, Link State ID

ip ospf linkStateData summary 561

ip ospf linkStateData summary

✓3500

✓9000

9400

3900

9300

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Displays summary link state advertisements (LSAs) in the link state database.

Valid Minimum Abbreviation

ip o l s

Important Consideration

■To view link state database information, OSPF must be active (enabled).

Options

Prompt	Description	Possible Values	[Default]
Area ID	Area ID (in the form	Valid area ID	0.0.0.0 (factory
	n.n.n.n where 0 <= n <= 255)		default), or
	that corresponds to the OSPF		current value
	area for which you want to
	view summary LSA information

Area mask	Subnet mask of the OSPF area
	for which you want to view
	summary LSA information
LSID	Link State ID:
	■ For type 3 summary LSAs,
	this is the IP address of the
	destination network
	■ For type 4 summary LSAs,
	this is the autonomous
	system boundary router’s
	Router ID (in the form of an
	IP address)

Valid area mask	0.0.0.0 (factory
	default), or
	current value
■ For type 3	0.0.0.0 (factory
summary LSAs,	default), or
a valid IP	current value
address

■For type 4 summary LSAs, a valid router ID

LSID mask	Link State ID bit mask	Link State ID bit	0.0.0.0 (factory
	(Example: 255.0.0.0)	mask	default), or
			current value