3Com 3500 manual To display summary information about Ethernet ports, enter, VendorName

206CHAPTER 7: ETHERNET PORTS

Field	Description
rxFrames	Number of frames that were copied into receive buffers
	by this port.
slot:channel	Maps a CoreBuilder® 9000 switch fabric module port to
(9000 switch fabric	an interface module backplane link. The “channel”
module)	designation is just a backplane trace number. For
	example, to troubleshoot a problem with switch fabric
	module port 5 (slot:channel 3:1), look at the first
	backplane link for slot 3.
slot:port	Module slot and port number in the CoreBuilder 9000
(9000)	system.
txBytes	Number of bytes that were transmitted by this port,
	including framing characters.
txErrs	Sum of all transmit errors that are associated with this
	port (summary report only).
txFrames	Number of frames that were transmitted by this port.
txQOverflows	Number of frames that were lost because transmit queue
	was full.
vendorName	Vendor name for a GBIC module. Other modules display
(3500)	n/a.

To display Ethernet port statistics relative to a baseline, see the

Implementation Guide for your system.

Procedure

1To display summary information about Ethernet ports, enter:

ethernet summary

2At the prompt (for example, (1-24all?)), select the ports whose information you want to display, or to display a port summary, specify ?

Indicate a range of ports with a hyphen (-). Separate nonconsecutive ports with a comma.

The system displays port information based on the ports that you specified.