3Com 3500 manual Ip rip password, IP RIP Password Example

ip rip password

✓3500

✓9000

9400

3900

9300

ip rip password 459

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Sets the IP RIP-2 password so that you can choose the IP interfaces that can put RIP-2 updates into their routing tables.

Valid Minimum Abbreviation

ip ri pa

Important Considerations

■If the sending interface has an IP RIP-2 password, the receiving interface must have the same IP RIP-2 password. If the receiving interface has a different password or a null password, its routing table is not updated.

■If you are using RIP-1, do not use the password option.

■You cannot use the ASCII string none as the password. This string is reserved to indicate the default password, which is a null value.

Options

Prompt	Description	Possible Values		[Default]
IP interfaces	Index number of the IP interfaces	■	One or more	–
	that you want to allow to receive		selectable
	route updates		interface indexes
		■	all
		■ ? (for a list of
			selectable
			interface
			indexes)
Password	Combination of characters that	■	up to 16	null
	you set as the RIP-2 password		alphanumeric	password
			characters
		■	null password

IP RIP Password Example

Select menu option (ip/rip): password

Select IP interfaces (1,2all?): 1

Interface 1 - Enter password {?} [none]: wings