3Com 3500 Enter the classifiers that are subject to this control, QoS Control Define Example

qos control define 717

10Enter the classifiers that are subject to this control.

The system displays the available classifiers in parentheses. If you select aggregate as the rate limit type, or if you said yes to the drop TCP connection packets option, only flow classifiers appear in parentheses.

QoS Control Define Example (3500)

This example shows a control for a nonflow classifier. Because the control has a rate limit of none, the system does not prompt you for information that applies to the other rate limit types.

Select menu option (qos/control): define

Enter control number {5-50?} [5]:

Enter control name {?}: definetest

Enter rate limit type (none,receivePort,aggregate) [none]: Enter service for conforming packets (high,best,low,drop) [best]:

Are conforming packets loss eligible (yes,no) [no]: Select IEEE 802.1p tag to apply to forwarded frames. Tag {0-7none?} [none]:

Drop packets used to establish a TCP connection (yes,no) [no]:

Set start and end time for the control (yes,no) [no]: yes Enter input time type (specific,daily,dayoftheweek,everydayoftheweek,weekdays, weekends,everyweekdays,everyweekends) [specific]: weekdays Enter the Qos control starting time (hh:mm): 09:00

Enter the Qos control ending time (hh:mm): 17:00 Select classifiers which are subject to this control. Enter classifiers (20,23,420,430,440,450,4...: 450