3Com 3500 manual Ip rip policy modify, Modifies an existing route policy for RIP, Export Only All

ip rip policy modify 469

ip rip policy modify

✓3500

✓9000

9400

3900

9300

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Modifies an existing route policy for RIP.

Valid Minimum Abbreviation

ip ri pol m

Important Considerations

■Route policies are classified as follows:

■Import policies import routing information from what RIP learns from a router/neighbor to the unified routing table. (You can also import routing information from Open Shortest Path First (OSPF).)

■Export policies send information from the routing table to RIP and RIP routers, which controls what is going out on the wire to the RIP domain. (You can also export from the routing table to OSPF.)

■The system assigns an index number to each policy that you define. This index takes into account all route policies set on the system, RIP and OSPF, so the assigned index can be higher than you may expect.

Options

Prompt	Description	Possible Values		[Default]
Policy type	Type of policy	■	import	import
		■	export
Origin	Whether or not the route is a	■	RIP	–
protocols	static route (for export policies	■	OSPF
(export)	only)
			all
		■
Source address	IP address of the source router	■	A valid IP	0.0.0.0
			address
		■	0.0.0.0
		■	all
Route address	Route that is associated with the	■	A valid IP	0.0.0.0
	source network		address
		■	0.0.0.0
		■	all
Route subnet	Subnet mask that is associated	A valid mask		Based on
mask	with the route			source
				network (for
				example,
				255.255.0.0)