3Com 3500 manual Module display, Fields in the Module Display, Port Gigabit

module display

3500

✓9000

9400

3900

9300

module display 129

Generates software and hardware revision numbers, module status information, and warning messages for certain module conditions.

Valid Minimum Abbreviation

mo d

Important Considerations

■The module display provides the configuration information for the module to which you are currently connected. To display configuration information for another module, disconnect from the current module through the Enterprise Management Engine (EME) and then connect to the module that you want to display.

■After you have logged in to the EME, you can access the module that you want to manage.

■Diagnostic messages appear in the display only if a module fails any of the tests at start-up.

Fields in the Module Display

Field	Description
24 port Gigabit	32-character alphanumeric name that uniquely identifies
Switching Fabric	this module
3C number	Each module’s 3Com 3C product identification number
Built	Date and time when this software version was built
Diagnostics	Whether a module has passed or failed diagnostics.
	Additional diagnostic messages describe a failure.
Memory size (AP, FP,	Memory capacities of the processors
Flash, Buffer)
Module ID	ID number that the system assigns to that module
Rev	Unique number assigned to the hardware build by 3Com
Serial	Each module’s unique serial number
Slot	Location of the module in the chassis (slot.subslot)
System name	Name of the system
System up time	Time that this module has been up and running
Time in service	Total operational time since the module was
	manufactured
Version	Software release number