3Com 3500 manual Configure the per-port tagging

bridge vlan define (3900/9300/9400/ 9000 Layer 2) 353

Options

Prompt Description Possible Values [Default]

VID	Unique, user-defined integer
	used by global management
	operations

Bridge ports Index numbers of the bridge ports that belong to the VLAN. If you include trunked ports, specify the anchor port of the trunk. See “Important Considerations” for information about the list of ports.

■ If the default	Next available
VLAN exists,	VID
2– 4094

■If the default VLAN does not exist, 1 to redefine the default VLAN, or 2–4094 for other VLANs

■ One or more of – the ports that are available to be assigned to the VLAN

■all

■? (for a list of selectable ports)

Per-port	Whether you want to configure
tagging	802.1Q VLAN tagging. You are
	prompted to answer for each
	port that you selected.

■ y (yes) y

■n (no)

Tag type	Whether you want no tagging or
	IEEE 802.1Q tagging (the VID).
	For a port shared by another
	VLAN, verify that the specified
	tag type is not in conflict with the
	port’s tag type in another VLAN.

■ none none

■802.1Q

VLAN name

(for VLANs other than the default)

Unique, user-defined name that	Up to 32 ASCII	–
identifies members of the VLAN.	characters or
If you use spaces, put quotation	spaces
marks around the VLAN name.

Procedure

Press Return or Enter to accept the default or existing values that appear in brackets [ ].

1Enter the VLAN identification (VID) number.

2Enter one or more port numbers. To assign all ports to the VLAN, enter

all

3Configure the per-port tagging.