3Com 3500 manual Sample IP Vrrp Summary Display

ip vrrp summary 487

Field	Description
Pri	Priority of the the virtual router. Represented by a value
	from 0 through 255. Used in Master router election.
	Value of 255 indicates that the router owns the IP
	addresses that are associated with the virtual router. 0
	indicates that the current Master has stopped
	participating in VRRP.
State	Current state of the VRRP router. One of the following:
	■ Master — In this state, the router is the active
	forwarding router for all IP addresses that are
	associated with the virtual router.
	■ Backup — In this state, the router monitors the
	availability of the Master router. If the Master router
	fails, the Backup router assumes forwarding
	responsibility for all IP addresses that are associated
	with the virtual router.
	■ Initialize — Transitional state between Backup
	and Master states. Typically indicates that the virtual
	router has been configured but not enabled, or that
	the virtual router mode has been set to disabled.
	In this state, the router waits for a Startup event.
	When the router receives the Startup event, it
	broadcasts an ARP request that contains the virtual
	router MAC address for all IP addresses that are
	associated with the virtual router and transitions to the
	Master state. If the Startup event is not received, it
	transitions to the Backup state.
Type	Type of virtual router: primary or backup
VLAN Index	Index number of the virtual LAN (VLAN) on which the
	virtual router is defined
VRID	Virtual Router ID (0 – 255) . Must be unique on the LAN

Sample IP VRRP Summary Display

Select menu option (ip/vrrp): summary

Enter VLAN interface index (2?) [2]:

Enter virtual router ID (1?) [1]:

VLAN	Index: 2 Ports: 7-12,14
VRID		Address	Type	State	Interval	Pri	Preempt	Auth	Error
1		158.101.175.228	Primary	Master	1 sec.	255	Yes	pass	none