3Com 3500 - page 391

bridge packetFilter portGroup addPort 391
bridge packetFilter
✓ 3500
✓ 9000
9400
3900
9300
portGroup addPort
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Adds ports to an existing port group.
Valid Minimum Abbreviation
b pa p a
Important Considerations
■You add ports to an existing group by entering port identifiers at the
prompts. At least one port group must exist before you can add ports.
■The maximum number of ports that a port group c an contain is 32,
which is the maximum number of ports on a switching system.
■Possible values for port groups (m) depend on the numbe r of user-
defined port groups on the system.
■Possible values for bridge ports (n) depend on the num ber of existing
bridge ports on the system.
Options
Bridge Packet Filter Port Group Add Port Examples
When you display port group 2, the display shows that port 2 is added:
Prompt Description Possible Values [Default]
Select port
group
Number of the port group to
which you want to add a
bridge port
■1 – m
■? (for a list of
groups)
Current port
group
Select
bridge port
Number of the bridge port that
you want to add to the
selected port grou p
■1 – n
■all
■? (for a list of
groups)
–
Select menu option (bridge/packetFilter/portGroup): add
Select port group {1-2|?} [2]: 2
Select bridge port(s) (1-6|all|?): 2
Select menu option (bridge/packetFilter/portGroup): display
Select port group (1-2|all|?) [2]:
Port Group 2 - Sales
Port 2 Port 5
Port 6