3Com 3500 manual Bridge Vlan Modify Example

bridge vlan modify (3500/9000 Layer 3) 359

Enter VID (2-4094) [5]: 5

Select bridge ports (1-13all?) [1-5,13]: 1-5,13Enter protocol suite (IP,IPX,Apple,XNS,DECnet,SNA,Vines,X25,NetBEUI,unspecified, IPX-II,IPX-802.2,IPX-802.3) [IPX-802.3]: IPX-802.3

Enter protocol suite ('q' to quit) (IP,IPX, Apple, XNS, DECnet,SNA,Vines,X25,NetBEUI,IPX-II,IPX-802.2): q Modify per-port tagging? (n,y) [y]: y

Enter port 1 tag type (none,802.1Q) [none]: none

Enter port 2 tag type (none,802.1Q) [none]: none

Enter port 3 tag type (none,802.1Q) [none]: none

Enter port 4 tag type (none,802.1Q) [none]: none

Enter port 5 tag type (none,802.1Q) [none]: 802.1Q

Enter port 13 tag type (none,802.1Q) [802.1Q]: 802.1Q

Enter VLAN Name {?} [IPX]: IPX1

Bridge VLAN Modify Example (3500)

This example shows the steps to modify the member ports and per-port tagging for an IP VLAN.

Select menu option: bridge vlan modify

Select VLAN interface index {1-2?}: 2

Enter VID (2-4094) [2]: 2

Select bridge ports (1-4, 6, 9-13all?) [3,6,9]: 9,11 Enter protocol suite (IP,IPX,Apple,XNS,DECnet,SNA,Vines,X25,NetBEUI,unspecified, IPX-II,IPX-802.2,IPX-802.3, IPX-802.2-SNAP) [IP]: IP Enter protocol suite ('q' to quit) (IPX,Apple,XNS,DECnet,SNA,Vines,X25,NetBEUI,IPX-II, IPX-802.2, IPX-802.3, IPX-802.2-SNAP): q

Modify layer 3 address? (n,y) [y]:n

Modify per-port tagging? (n,y) [y]: y

Enter port 9 tag type (none,802.1Q) [none]: 802.1Q

Enter port 11 tag type (none,802.1Q) [none]: 802.1Q

Enter VLAN Name {?} [IP1]: IP1