3Com 3500 manual Fields in the QoS Control Detail Display, Destined is over its threshold

708CHAPTER 22: QUALITY OF SERVICE (QOS) AND RSVP

qos control detail For CoreBuilder 9000: Applies to Layer 3 switching modules only.

✓3500

✓9000

9400

3900

9300

Displays detailed information about the QoS controls that you specify.

Valid Minimum Abbreviation

q co det

Options

Prompt	Description	Possible Values		[Default]
Control	Number of the control for	■	One or more	–
number	which you want detail		configured
	information		controls
		■	all

■ ? (for a list of selectable controls)

Fields in the QoS Control Detail Display

Field	Description
802.1p tag	IEEE 802.1p priority tag value (0 – 7)that is applied to
	forwarded frames. Can be defined for both flow and
	nonflow classifiers.
Burst	Burst size in KBytes.
Classifiers controlled	Classifiers that this control affects.
Control (number)	Number of the control.
Control name	Name that you assign to the control.
End time	Control end time.
Excess loss eligible	For receivePort or aggregate rate limit types, whether excess
	packets are loss eligible.
Excess service	For receivePort or aggregate rate limit type, service level for
	excess packets.
Limit	Rate limit in KBytes/sec or percentage.
Loss eligible	Whether conforming packets are loss eligible. A loss-eligible
	packet can be dropped if the transmit queue for which it is
	destined is over its threshold.
Ports	Receive ports for which you want to enable the rate limit.
Rate limits control	Number of the control that the rate limit affects.
Service	Service level for the conforming packets (high, best, low,
	or drop).