bridge vlan modify (3900/9300/9400/ 9000 Layer 2) 361

Prompt

Description

Possible Values

[Default]

 

 

 

 

VID

Unique, user-defined integer used

2 – 4094

Current

(for VLANs

by management operations

 

VID

 

 

 

other than

 

 

 

the default)

 

 

 

Bridge ports Index numbers of the bridge ports that belong to the VLAN. To add trunked ports, specify the anchor port of the trunk.

Per-port

Whether you want to configure

tagging

802.1Q VLAN tagging. You are

 

prompted to answer for each port

 

that you selected.

One or more

Current

index numbers

ports in

of the ports that

VLAN

are available to

 

be assigned to

 

the VLAN

 

all

? (for a list of selectable ports)

y (yes)

y

n (no)

Tag type

VLAN name

(for VLANs other than the default)

Either no tagging or IEEE 802.1Q tagging (the VID)

Unique, user-defined name that identifies members of the VLAN. If you use spaces, put quotation marks around the VLAN name.

none

Current

802.1Q

tag type

for each

 

 

 

 

port

Up to 32 ASCII

Current

characters or

name

spaces

 

Procedure

1Enter the VLAN interface index.

2For a VLAN other than the default VLAN, enter a VLAN identification (VID) number or keep the default in brackets.

3Specify the index numbers of the bridge ports.

4Specify whether you want to modify per-port tagging.

5If you modify per-port tagging, enter the new tag type for the port (none or 802.1Q).

6If you have defined more than one port, enter a tag type for each port.

7For a VLAN other than the default VLAN, enter a new VLAN name or keep the current name.

The VLAN name can include up to 32 ASCII characters, including spaces. If you include spaces, put quotation marks around the VLAN name.

Page 361
Image 361
3Com 3500 manual Are available to Be assigned to Vlan All, Yes Tag type Vlan name