3Com 3500 manual Management IP Advanced Trace Route Example TTL value, Best

management ip advancedTraceRoute 185

		Possible
Prompt	Description	Values	[Default]

sourceAddress Source address other than the one from which the probe packets originate. This option is available if you have more than one IP interface defined on the system.

■ n (no) y

■y (yes)

Interface index	Index number of the ICMP source	A selectable		0 (the router
	IP address that you want to use.	interface		picks the
	The system lists defined interfaces			best
	and their indexes.			interface)
Numeric mode	Whether the system shows hop	■	disabled	default
	addresses numerically or	■	enabled
	symbolically.

Management IP Advanced Trace Route Example (TTL value of 10):

Select menu option (ip): advancedTraceRoute Enter host IP address [158.101.101.27]:

Enter maximum Time-to-Live (ttl) (1-255) [30]: 10 Enter Destination Port number (30000-65535) [33434]:

Enter the number of probes to be sent at each ttl level (1-10) [3]: Enter time (sec) to wait for a response (1-10) [3]:

Enter the packet size (bytes) (28-4096) [28]: Configure TRACEROUTE sourceAddress? (n,y) [y]:

Index Interface address

0Best interface (default)

1158.101.117.151

2158.101.10.1

Select interface index {0-2?} [0]:

Enter Numeric mode (disabled,enabled) [disabled]:

Press "Enter" key to interrupt.

Traceroute to 158.101.101.27: 10 hops max, 28 bytes packet

1	158.101.117.254	12	ms	7	ms	5	ms
2	158.101.112.254	51	ms	9	ms	7	ms
3	158.101.96.22	21	ms	15	ms	6	ms
4	158.101.101.27	18	ms	90	ms	80	ms