3Com 3500 manual Qos rsvp detail, Displays detailed Rsvp information when Rsvp is enabled

qos rsvp detail 729

qos rsvp detail

✓3500

✓9000

9400

3900

9300

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Displays detailed RSVP information when RSVP is enabled.

Valid Minimum Abbreviation

q r de

Important Consideration

■If no flows are installed on the system or on a Layer 3 module, the command displays only the summary information.

Options

Prompt	Description	Possible Values		[Default]
Level of RSVP	If RSVP flows are available to report,	■	all	–
information	the amount of RSVP information	■	session
(when flows	you want
are installed)		■	IP

Fields in the QoS RSVP Detail Display

Field	Description
Excess loss eligible	Whether excess packets are loss-eligible.
Excess service	Service level for excess/policed traffic (best or low).
Per resv bandwidth	Largest reservation that RSVP attempts to install.
Policing option	When to drop excess packets. Edge policing causes excess
	packets to be dropped only at the edge (that is, when the
	traffic has not yet passed through any network device that has
	already performed policing for that flow).
Session	Session numbers, destination IP addresses and ports, protocols,
	number of senders, receivers, and RSVP reservations.
Session – receiver	Port numbers, an RSVP style (ST) of fixed filter (FF), shared
and session	explicit (SE), or wildcard filter (WF), next hop addresses, LIH
reservation	values, TTD values, bandwidth values, burst values, and filters.
Session – sender	Port numbers, source IP addresses, previous hop addresses,
	Logical Interface Handle (LIH) values, Time To Die (TTD) values,
	bandwidth values, burst size values, and output ports.
Session –	Actual flow that was installed on the system (shown in the last
installed flows	portion of the output).
Total resv	Admission control policy. RSVP begins to refuse reservations
bandwidth	when the requested bandwidth on an output link exceeds the
	total reservable bandwidth.