3Com 3500 - page 388

388 CHAPTER 15: PACKET FILTERS
bridge packetFilter
✓ 3500
✓ 9000
9400
3900
9300
portGroup create
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Creates a port group.
Valid Minimum Abbreviation
b pa p c
Important Considerations
■You can create up to 32 port groups, one for each bit in the 32-bit
port group mask.
■The portGroup create command only creates port group
associations. You must create and assign a filter to a port group to
affect filtering. See “bridge packetFilter create portGroup” and
“bridge packetFilter assign” earlier in this chapter.
■Possible values for bridge ports (n) depend on the num ber of bridge
ports on the system.
Options
Prompt Description Possible Values [Default]
Select port
group mask
Mask that you want to assign
to the port group
■1 – 32
■? (for a list of
masks)
–
Select port
group name
Name of the port group that
you want to create
Use quotation marks around
any string with embedded
spaces. Use ““ to enter an
empty string
■Up to 32
alphanumeric
characters
■? (for name criteria)
–
Select
bridge port
Number of the bridge port that
you want to add to the new
group
■1 – n
■all
■? (for a list of valid
ports)
–