3Com 3500 - page 407

ip interface modify 407
✓ 3500
✓ 9000
✓ 9400
✓ 3900
✓ 9300
ip interface modify For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Changes the configuration of an interface that you have already defined.
Valid Minimum Abbreviation
ip i m
Important Consideration
■On the CoreBuilder 3500, you cannot m odify the port number (router
port-based routing) after it has been defined because of the
associated virtual LAN (VLAN); you must remove the interface and
then redefine it.
Options
Prompt Description Possible Values [Default]
IP interface Index number that is associated
with the interface that you want
to modify.
(Not applicable if you h ave more
than one interface)
■A selectable IP
interface index
■? (for a list of
selectable
indexes)
Current
value
IP address IP address of the interface that
you want to modify.
A valid IP address
in the range of
addresses that are
assigned to your
organization
Current IP
address
Subnet mask Subnet mask for the interfac e
that you want to modify.
A valid subnet
mask in
accordance with
the bits that are
used for network
number,
subnetwork, and
host number
Current
subnet
mask
VLAN interface
index (for
VLAN-based
routing)
Index number of the IP VLAN
that is associated with the IP
interface; for a VLAN-based IP
interface, you must assign this
number.
(Not applicable if you h ave more
than one VLAN)
■A selectable
VLAN index
■? (for a list of
selectable
VLAN indexes)
Current
value