3Com 3500 manual Possible Prompt Description Values Default, Wait Wait interval in seconds that

184CHAPTER 5: OUT-OF-BAND MANAGEMENT

management ip advancedTraceRoute

✓3500

9000

9400

3900

9300

Traces a route to a host with one or more of the advanced traceRoute options.

Valid Minimum Abbreviation

m ip advancedT

Important Considerations

■When you specify a host name, the host name and its associated IP address must be configured on a network name server. Also, you must add the IP address on the name server to the list of name server addresses that are associated with the network domain name. See “ip dns define” in Chapter 16 for more information.

■To interrupt the command, press Enter.

Options

		Possible
Prompt	Description	Values		[Default]
Host name or	Host name or IP address of the	■	A valid	0.0.0.0
IP address	destination that you want to ping		host
			name
		■	IP
			address
Maximum ttl	Maximum number of hops that	1 – 255		30
	the system can use in outgoing	hops
	probe packets
Destination	Destination (or base) UDP port	30000 –		33434
port	number that the system uses in	65535
	probe packets. Set the destination
	UDP port number to be very high
	to ensure that an application at
	the destination is not using that
	port.
probeCount	Maximum number of probes that	1 – 10		3
	the system sends at each TTL level
Wait	Wait interval (in seconds) that	1 – 10		3
	determines the maximum amount	seconds
	of time that the system waits for a
	response to a probe
packetSize	Number of bytes that the system	28 – 4096		28
	sends in each UDP probe packet	bytes