management ip rip display

3500

9000

9400

3900

9300

management ip rip display 173

Displays information about the Routing Information Protocol (RIP) interfaces on the system. RIP is one of the IP Interior Gateway Protocols (IGPs). When enabled, RIP allows the system to dynamically configure its routing tables.

Valid Minimum Abbreviation

m ip ri d

Important Considerations

The first line in the output (the status line) indicates whether IP routing is enabled (in-band only):

IP interface options (such as ICMP router discovery) appear under ip interface detail and are set on a per-interface basis. The rest of the output contains more RIP interface information.

The two available RIP modes are as follows:

Disabled — The system ignores all incoming RIP packets and does not generate any RIP packets of its own.

Learn — The system processes all incoming RIP packets, but it does not transmit RIP updates.

Fields in the Management IP RIP Display

Field

Description

 

 

Index

Index number of the interface

RIP-1 mode

Mode for RIP-1. If you disable RIP-1, the output lists

 

the state as off. Other modes are learn

 

(default), advertise, and enabled.

RIP-2 mode

Mode for RIP-2. If you disable RIP-2, the output lists

 

the state as off. Other modes are learn

 

(default), advertise, and enabled.

 

 

Page 173
Image 173
3Com 3500 manual Fields in the Management IP RIP Display, Index Index number of the interface RIP-1 mode, RIP-2 mode