Anritsu S332D, S331D Set T1/E1 Data Logging Control Word A015h Option 50 only, Site Master PM 101

Bytes to Follow: 0 bytes

Site Master Returns: 3 bytes

1)Volts peak-to-peak (higher byte)

2)Volts peak-to-peak (lower byte)

3)255 (FFh) Operation Complete Byte

238 (EEh) Time-out Error

Set T1/E1 Receive Input Configuration Options - Control Word (A013h) (Option 50 only)

Description: Sets the Rx Input Configuration for the T1/E1 modes.

Bytes to Follow: 2 bytes

1)T1/E1 Measurement (00h: BERT, 01h: Vpp)

2)Rx Input Config

00h: Terminate

01h: Bridged

02h: Monitor +20 dB (BERT only)

Site Master Returns: 1 byte

1)255 (FFh) Operation Complete Byte

224 (E0h) Parameter Error: Invalid measurement or configuration

238 (EEh) Time Out Error

Set T1/E1 Measurement Duration - Control Word (A014h) (Option 50 only)

Description: Sets the measurement duration for the current mode (T1 or E1).

Bytes to Follow: 1 byte

1)Measurement Duration Index 00h: Manual

01h: 3 minutes

02h: 15 minutes

03h: 30 minutes

04h: 1 hour

05h: 3 hours

06h: 6 hours

07h: 12 hours

08h: 1 day

09h: 2 days

Site Master Returns: 1 byte

1)255 (FFh) Operation Complete Byte

224 (E0h) Parameter Error: Invalid duration or not in T1 or E1 mode 238 (EEh) Time Out Error

Set T1/E1 Data Logging - Control Word (A015h) (Option 50 only)

Description: Enables and disables data logging for T1/E1 modes. The ability to log data depends on the amount of available memory.

Bytes to Follow: 1 byte

1)Data Logging Status

Site Master PM 101