Anritsu S331D, S332D manual Site Master PM

1.dBm194 (highest byte)

2.dBm

3.dBm

4.dBm (lowest byte)

For Power Meter Mode (Option 29):

57)Power Meter Mode (00h = Off, 01h = On)

58)Power Meter Unit (00h = dBm, 01h = Watts)

59)Start Frequency195 (highest byte)

60)Start Frequency

61)Start Frequency

62)Start Frequency (lowest byte)

63)Stop Frequency (highest byte)

64)Stop Frequency

65)Stop Frequency

66)Stop Frequency (lowest byte)

67)Center Frequency (highest byte)

68)Center Frequency

69)Center Frequency

70)Center Frequency (lowest byte)

71)Frequency Span (highest byte)

72)Frequency Span

73)Frequency Span

74)Frequency Span (lowest byte)

75)Power Offset Status (00h = Off, 01h = On)

76)Power Offset196 (highest byte)

77)Power Offset

78)Power Offset

79)Power Offset (lowest byte)

80)Power Relative Status (00h = Off, 01h = On)

81)Power Relative Value197 (highest byte)

82)Power Relative Value

83)Power Relative Value

84)Power Relative Value (lowest byte)

85)RMS Averaging Level (00h = Off, 01h = Low, 02h = Medium, 03h = High)

86)Power Zero Status (00h = Off, 01h = On)

87)External Reference Status (00h = Off, 01h = On)

88)External Reference Frequency198 (highest byte)

89)External Reference Frequency

90)External Reference Frequency

91)External Reference Frequency (lowest byte)

92)Signal Standard199 (higher byte)

93)Signal Standard (lower byte)

94)Channel Selection200 (higher byte)

194Value sent as ( value in dBm * 1000 ) + 270,000

195Scaled by Frequency Scale Factor (bytes 96-97)

196Value sent as ( value in dB * 1000 ), valid values are 0 to 60 dB

197Value sent as ( value in dBm * 1000 )

198Scaled by Frequency Scale Factor (bytes 96-97)

199Index into Standard List (use control byte #89 to retrieve the ASCII string name). “No Standard” sent as FFFEh

200“No Channel” is sent as FFFEh

58 Site Master PM