286)Trigger Type117
287)Interference Analysis Frequency118 (highest byte)
288)Interference Analysis Frequency
289)Interference Analysis Frequency
290)Interference Analysis Frequency (lowest byte)
291)Trigger Position (0 – 100%)
292)Min Sweep Time (in s) (highest byte)
293)Min Sweep Time (in s)
294)Min Sweep Time (in s)
295)Min Sweep Time (in s) (lowest byte)
296)Video Trigger Level119 (highest byte)
297)Video Trigger Level
298)Video Trigger Level
299)Video Trigger Level (lowest byte)
300)Status Byte 8
(LSB) | bit 0: Input Power Status (1b = Input Power Too High, 0b = Input Power Ok) |
| bits |
301) Status Byte 9 | |
(LSB) | bits |
| bit 7: Not Used |
302) Status Byte 10: (0b = Off, 1b = On) | |
(LSB) | bits |
| bit 2: Max Hold On/Off |
| bit 3: Min Hold On/Off |
| bits |
303)Impedance (00h = 50, 0Ah = 75 Anritsu Adapter, 0Ch = 75 Other Adapter)
304)Impedance Loss120 (higher byte)
305)Impedance Loss (lower byte)
306)AM/FM Demod Type121
307)AM/FM Demod Status (01h = On, 00h = Off)
308)AM/FM Demod Volume (0 to 100)
309)AM/FM Demod Frequency (highest byte)122
310)AM/FM Demod Frequency
311)AM/FM Demod Frequency
312)AM/FM Demod Frequency (lowest byte)
313)AM/FM Demod Time (in ms) (highest byte)
314)AM/FM Demod Time (in ms)
315)AM/FM Demod Time (in ms)
316)AM/FM Demod Time (in ms) (lowest byte)
317)SSB BFO Offset123 (highest byte)
318)SSB BFO Offset
319)SSB BFO Offset
320)SSB BFO Offset (lowest byte)
117Trigger Type – 00h = Single, 01h = Free Run, 02h = Video, 03h = External
118Scaled by Frequency Scale Factor (bytes
119Value sent as ( value in dBm * 1000 ) + 270,000
120Value sent as (value in dB * 1000), valid values are 0 to 20 dB
121AM/FM Demod Type: 00h =
122Scaled by Frequency Scale Factor (bytes
123Value sent as ((value in Hz) – 10,000)
44 | Site Master PM |