Anritsu S331D, S332D manual Trigger Self-Test Control Byte #21 15h

bit 5: Channel Power On/Off

bit 6: Adjacent Channel Power On/Off

bit 7: Not Used

398)Printer Type55

399)Current Language

(0 = English, 1 = French, 2 = German, 3 = Spanish, 4 = Chinese, 5 = Japanese)

400)LCD Contrast Value (0-255)

401)RTC battery 56(higher byte)

402)RTC battery (lower byte)

403)PC board revision 57(higher byte)

404)PC board revision (lower byte)

405)Reference Level Offset58 (highest byte)

406)Reference Level Offset

407)Reference Level Offset

408)Reference Level Offset (lowest byte) 409-434) Not Used

Trigger Self-Test – Control Byte #21 (15h)

Description: Triggers a self test on the Site Master.

Bytes to Follow: 0 bytes

Site Master Returns: 12 bytes

1) Self-test report: (0b = Fail, 1b = Pass)

(LSB)	bit 0 : Phase Lock Loop
	bit 1 : Integrator
	bit 2 : Battery
	bit 3	: Temperature
	bit 4	: EEPROM read/write
	bit 5	: RTC Battery
	bits 6- 7 : Not Used
2) Self-test report: (0b = Fail, 1b = Pass)
(LSB)	bit 0	: Spectrum Analyzer Lock
	bits 1–7 : Not Used

3)Battery Voltage (higher byte)

4)Battery Voltage (lower byte)

5)Temperature (higher byte)

6)Temperature (lower byte)

7)Lock Fail Counter (higher byte)

8)Lock Fail Counter (lower byte)

9)Integrator Fail Counter (higher byte)

10)Integrator Fail Counter (lower byte)

11)Spectrum Analyzer Lock Fail Counter (higher byte)

12)Spectrum Analyzer Lock Fail Counter (lower byte)

55See Control Byte #30 for supported printers.

56Value sent as Volts * 10. For example, 2.7V = 27.

57This value is for internal use only.

58Value sent as (value in dBm * 1000) + 270,000

28 Site Master PM