Anritsu S332D, S331D manual Bit 0 C/I Measurement On/Off

335)Frequency Scale Factor182 (higher byte)

336)Frequency Scale Factor (lower byte)

337)Frequency Range Minimum183 (highest byte)

338)Frequency Range Minimum

339)Frequency Range Minimum

340)Frequency Range Minimum (lowest byte)

341)Frequency Range Maximum184 (highest byte)

342)Frequency Range Maximum

343)Frequency Range Maximum

344)Frequency Range Maximum (lowest byte)

345)Linked Trace Number (1-200)

346)Status Byte 9 (0b=Off, 1b=On)

(LSB)	bit 0 : C/I Measurement On/Off
	bits 1-3	: C/I Carrier Trace/Signal Type185
	bits 4-7	: Not Used

347)C/I Calculated Power186 (Carrier or Interference - NB FHSS187) (highest byte)

348)C/I Calculated Power (Carrier or Interference - NB FHSS) (lowest byte)

349)C/I Calculated Power (Carrier or Interference - NB FHSS) (highest byte)

350)C/I Calculated Power (Carrier or Interference - NB FHSS) (lowest byte)

351)C/I Calculated Power188 (Interference - WB FHSS189) (highest byte)

352)C/I Calculated Power (Interference - WB FHSS) (lowest byte)

353)C/I Calculated Power (Interference - WB FHSS) (highest byte)

354)C/I Calculated Power (Interference - WB FHSS) (lowest byte)

355)C/I Calculated Power190 (Interference - Broadband191) (highest byte)

356)C/I Calculated Power (Interference - Broadband) (lowest byte)

357)C/I Calculated Power (Interference - Broadband) (highest byte)

358)C/I Calculated Power (Interference - Broadband) (lowest byte)

359)Occupied BW Power192 (highest byte)

360)Occupied BW Power

361)Occupied BW Power

362)Occupied BW Power (lowest byte)

363)Marker Type193

364-431) Not Used

432-2035) Sweep Data (401 points * 4 bytes/point= 1604 bytes) 4 bytes for each data point

182In number of Hz

183Scaled by Frequency Scale Factor (bytes 335-336)

184Scaled by Frequency Scale Factor (bytes 335-336)

185000b = NB FHSS, 001b = Carrier - WB FHSS, 010b = Carrier - Broadband, 111b = Interference

186Value sent as (value in dBm ￿ 1000) + 270,000

187If Status Byte 9, bits 1-3 equal 111b, then value will be calculated power for the interference trace as a NB FHSS signal. Otherwise, these bytes represent the calculated carrier power.

188Value sent as (value in dBm ￿ 1000) + 270,000

189If Status Byte 9, bits 1-3 equal 111b, then value will be calculated power for the interference trace as a WB FHSS signal. Otherwise, these bytes should be ignored.

190Value sent as (value in dBm ￿ 1000) + 270,000

191If Status Byte 9, bits 1-3 equal 111b, then value will be calculated power for the interference trace as a Broadband signal. Otherwise, these bytes should be ignored.

192If Method is % of power, then the value is dB Down ￿ 1000. If the Method is db Down, then the value is %.

19300h = Regular Marker, 01h = Noise Marker

Site Master PM 57