| bit 7 : Not Used |
168) Status Byte 7: (0b = Off, 1b = On) | |
(LSB) | bits |
| bit 2: |
| bit 3: |
| bit 4: |
| bit 5: |
| bit 6: |
| bit 7: Not Used |
169) Status Byte 8: | |
(LSB) | bits 0 - 1 : DTF Windowing Mode |
| bit: 1 0 |
|
|
| 0 0 | - Rectangular (No Windowing) |
|
| 0 1 | - Nominal Side Lobe |
|
| 1 0 | - Low Side Lobe |
|
| 1 1 | - Minimum Side Lobe |
| bit 2 : Serial Port Echo Status On/Off | ||
| bits 3 – 7 : Not Used | ||
170) Status Byte 9: (0b = Off, 1b = On ) | |||
(LSB) | bit 0 : Fixed CW Mode On/Off | ||
| bit 1 : Site Master VNA Cal On/Off | ||
| bit 2 | : LCD Back Light On/Off | |
| bit 3 | : Measurement Unit Metric/English (0b = English, 1b = Metric) | |
| bit 4 | : InstaCal On/Off | |
| bits | ||
| bit 7 | : Cal Mode (0b = OSL Cal, 1b = FlexCal) |
171)VNA Signal Standard96 (higher byte)
172)VNA Signal Standard (lower byte)
For Spectrum Analyzer and Transmission Measurement (Option 21) Modes:
26)Spectrum Analyzer Mode Data Points (higher byte)
27)Spectrum Analyzer Mode Data Points (lower byte)
28)Spectrum Analyzer Start Frequency97 (highest byte)
29)Spectrum Analyzer Start Frequency
30)Spectrum Analyzer Start Frequency
31)Spectrum Analyzer Start Frequency (lowest byte)
32)Spectrum Analyzer Stop Frequency (highest byte)
33)Spectrum Analyzer Stop Frequency
34)Spectrum Analyzer Stop Frequency
35)Spectrum Analyzer Stop Frequency (lowest byte)
36)Spectrum Analyzer Center Frequency (highest byte)
37)Spectrum Analyzer Center Frequency
38)Spectrum Analyzer Center Frequency
39)Spectrum Analyzer Center Frequency (lowest byte)
40)Spectrum Analyzer Frequency Span (highest byte)
41)Spectrum Analyzer Frequency Span
42)Spectrum Analyzer Frequency Span
43)Spectrum Analyzer Frequency Span (lowest byte)
44)Spectrum Analyzer Minimum Frequency Step Size (highest byte)
96Index into Standard List (use control byte #89 to retrieve the ASCII string name). “No Standard” sent as FFFEh
97Scaled by frequency scale factor (bytes
40 | Site Master PM |