CHAPTER 6. CENTRALIZED ATTENDANT SERVICE (CAS) (V3 AND GENERIC 1 SYSTEMS)

To extend a CAS call to the originating branch using the Flash button:

1.Press [Flash].

ŽFlash lamp lights for 2 seconds.

2.Dial the requested extension number.

3.End the call by going on-hook or by pressing another call appearance button, the Disconnect button, or the Drop button.

Calling party is connected to the ringing line.

RLT is dropped .

To extend a CAS call to the originating branch using the Conference or Transfer button:

1.Press [Conference] or [Transfer].

2.Dial the requested extension number.

3.End the call by going on-hook or by pressing another call appearance button, the Disconnect button, or the Drop button.

Calling party is connected to the ringing line.

RLT is dropped.

To put a CAS call on Remote Hold:

1.Press [Flash] or [Conference] or [Transfer].

2.Dial the Remote Hold feature access code as administered at the originating location.

ŽListen for Remote Hold confirmation tone.

3.End the call by going on-hook or by pressing another call appearance button, the Disconnect button, or the Drop button.

ŽCall is on Remote Hold.

RLT is dropped.

To cancel a CAS call:

1.Press [Flash] or [Conference] or [Transfer].

ŽThe extended call is dropped, or Remote Hold attempt is deactivated.

6-9

Page 115
Image 115
AT&T 75 manual To cancel a CAS call Press Flash or Conference or Transfer