CHAPTER 4. USING THE FEATURES

In addition to, or instead of, the system Ioudspeaker paging equipment, a variety of PagePac* paging systems can be used. The largest of these supports 39 paging zones. Your System Manager will inform you if your system includes this equipment and its associated 1- or 2-digit selection code.

The allowable paging time is preset for the system. (The System Manager will provide this information.) If the preset time interval expires while an announcement is being made, the call is disconnected; intercept tone is heard.

Note: The attendant cannot extend calls to a loudspeaker paging device.

To Page for a caller:

1.Press [Start].

Dial tone heard.

Split lamp lights.

Caller is separated from the connection.

2.Dial the page zone or PagePac paging system’s trunk access code.

Dial tone heard.

3.Use the touch-tone dial or the selector console to dial the extension number where the call is to be parked. Listen for call progress tone.

Confirmation tone—the call is temporarily parked; go to Step 4.

Ž Steady tone —enter the digits of the selected PagePac paging system zone; go to Step 4.

Busy tone—a call is already parked at the dialed extension number; go to Step 6.

4.Speak into the handset to make the announcement.

ŽAnnouncement heard in desired paging zone; go to Step 5.

ŽConfirmation tone—call is automatically and permanently parked on parking party.

5.Press [Release].

Registered Trademark of Harris Corporation Dracon Division

4-32

Page 91
Image 91
AT&T 75 manual To Page for a caller