CHAPTER 4. USING THE FEATURES

To page using a Page button:

1.Check status of lamp associated with desired paging zone button.

Lamp dark—paging zone idle; go to Step 2.

Lamp lighted—paging zone in use; wait for lamp to go dark; then go to Step 2.

2. Press the desired paging zone button.

Lamp associated with button pressed and lamp associated with Page All button (if provided) light.

If Page All button is pressed, all lamps associated with a page button light.

3.Speak into handset to make the announcement.

ŽAnnouncement heard in desired paging zone; go to Step 4.

Intercept tone— announcement was too long; try again.

4.Press [Release].

Procedure complete.

To page by dialing an access code:

1.Press [Start].

ŽDial tone heard.

ŽAtnd lamp at idle call appearance button lights.

2.Dial desired Loudspeaker Paging Access code, and listen for tone.

ŽConfirmation tone—paging zone available; go to Step 3.

ŽBusy tone—paging zone in use; go to Step 4.

3.Speak into handset to make announcement.

Announcement heard in desired paging zone; go to Step 5.

Intercept tone— announcement was too long; try again.

4-30

Page 89
Image 89
AT&T 75 manual To page using a Page button, To page by dialing an access code