AT&T 75 manual Inspect Mode, Date Time, Am Friday November 30, = Outside Call 103, Next, Make Call

CHAPTER 2. DESCRIPTION

• Inspect Mode

Displays call-related information on held calls when the attendant is active on a call. The attendant can press this button at any time. For example, the attendant is active on call appearance button b, and a call is held on call appearance button a. T h e attendant can press the Inspect Mode button and call appearance button a to display the information associated with the call on button a.

• Date Time

Displays the current time of day and date. The display will return to the previous information after 5 seconds. For example, the attendant presses the button, and the display shows the following:

10:23 am FRIDAY NOVEMBER 30, 1989

•Timer (Elapsed Time)

Displays elapsed time in hours, minutes, and seconds. The timing starts when the button is pressed and stops when the button is pressed again. The second button press also removes the elapsed time from the display.

The Timer button can be used any time the attendant wants to record the time spent on a particular call or operation. An example of the display is as follows:

a= OUTSIDE CALL :1:03

This example shows that the attendant has been active on an outside call on call appearance button a for 1 minute and 3 seconds.

•Cover Msg Rt (Coverage Message Retrieval)

Retrieves Leave Word Calling (LWC) messages for voice terminal users.

• Next

Displays the next stored LWC message or displays END OF MESSAGES, NEXT TO REPEAT when in the Cover Msg Rt mode. Displays the next name in the directory when in the Integrated Directory mode.

• Delete Msg (Message)

Deletes the displayed message.

• Make Call

Automatically returns the call requested by the currently displayed LWC message or calls the currently displayed Integrated Directory listing.

2-29