AT&T 75 manual Multiple Listed Directory Numbers, Network Access-Private, Network Access-Public

CHAPTER 4. USING THE FEATURES

2. To delete additional messages, continue to press [Next] or [Next Msg], then [Delete Msg].

ŽWhen all messages are deleted, display shows NO MESSAGES.

3.Press [Normal Mode].

ŽProcedure complete.

Multiple Listed Directory Numbers

This feature provides access to the system over a maximum of 50 listed directory numbers. Calls incoming to these numbers are routed to the attendant console(s) to be extended to the requested person or department. The alphanumeric display shows the trunk identification of the trunk group used on the call.

Network Access—Private

This feature allows calls to be connected to networks such as Common Control Switching Arrangement (CCSA), Electronic Tandem Network (ETN), and Enhanced Private Switched Communications Service (EPSCS). A private network is dedicated to a company and is accessed by dialing the Private Network access code (usually 8). After accessing the private network, the attendant or the calling party can dial the desired number to complete the call.

If intercept tone is heard, the call is not authorized. If reorder tone is heard or if the called party is busy, try the call later.

Network Access—Public

For outgoing calls to the public network, the Automatic Route Selection (ARS) feature, if available, can be used to select the best route available at the time the call is placed. For manual route selection, dial access codes can be assigned to outgoing routes. Attendants dial the assigned access code or press an assigned Trunk Group Select button to access local central office trunks, foreign exchange trunks, and wide area telecommunications service (WATS) trunks. After second dial tone is heard, the attendant dials the desired number or presses Release to allow the calling party to dial.

Night Service

This feature directs all attendant group calls for the principal and daytime attendant consoles to a night console, if provided. With Generic 1, V2, and V3 systems, principal and daytime consoles can still receive individual attendant calls. The night console is identical to the principal console, and operating procedures are the same for both consoles.

4-36