AT&T 75 manual Lamps, Individual Calls Waiting Enhanced Console Only

CHAPTER 2. DESCRIPTION

Lamps

•Alarm and Alarm Reported (Enhanced) or Alm-Ack(Alarm-Acknowledge) (Basic).

The Alarm or Alm lamp (left lamp) lights when a system alarm is detected. Both lamps light when the Customer Support Service Organization (CSSO) is notified. The Alarm Reported lamp or the Ack lamp flashes if the system was unable to notify the remote maintenance center. Both lamps go dark when the alarm condition is cleared or when there is no alarm.

• Calls Waiting (Enhanced and Basic) and Calls Waiting Warning (Enhanced)

The Calls Waiting lamp lights when calls made to the attendant group number (0) or the listed directory number are waiting in the attendant group queue to be answered. The Calls Waiting (Enhanced) lamp and the lamp on the left (on the Basic) lights when at least one call is waiting to be answered. The Calls Waiting Warning (Enhanced) lamp and the lamp on the right (on the Basic) lights when the calls waiting exceed the limit preset (by the System Manager) for the system.

Calls waiting in the queue of the attendant’s individual extension number are indicated by the top lamp over the Forced Release button (all system versions of basic console except V1) or the Individual Calls Waiting lamp (enhanced console only) .

• Individual Calls Waiting (Enhanced Console Only)

The Individual Calls Waiting lamp lights when calls made to the attendant’s individual extension number are waiting in queue to be answered. The Individual Calls Waiting lamp lights when at least one call is waiting to be answered.

•Pos Avail (Position Available)

The Pos Avail lamp lights when the console is available for calls to the attendant group. This lamp does not indicate whether or not the console is available for individual attendant (Version 2, Version 3, and Generic 1 ) calls.

This lamp is dark when the attendant is active on a call, when a call is ringing the console, when the handset or headset is unplugged, when the attendant presses the Pos Busy (Position Busy) button, or when the system is in a mode other than that for which the console is assigned (night service, for example). The Pos Busy button is described in “Feature Buttons.”

2-11