AT&T 75 manual Attendant Direct Trunk Group Selection

CHAPTER 4. USING THE FEATURES

To activate attendant control of trunk group access:

1.Press (Cont Act).

•Cont Act lamp lights steadily.

2.Press the Trunk Group Select button of the trunk group to be controlled while observing the Cont Act lamp and the Cont lamp for the specified Trunk Group Select button.

•Cont Act lamp goes dark; Cont lamp for the specified Trunk Group Select button lights—operation allowed.

•Cont Act lamp flutters, then goes dark; Cont lamp for the specified Trunk Group Select button remains dark—operation denied; return to Step 1.

To deactivate attendant control of trunk group access:

1.Press (Cont Deact).

•Cont Deact lamp lights steadily.

2.Press Trunk Group Select button of the trunk group for which control is to be deactivated while observing the Cont Deact lamp and the Cont lamp for the specified Trunk Group Select button.

•Cont Deact lamp goes dark; button goes dark—operation

Cont lamp for the specified Trunk Group Select allowed.

•Cont Deact lamp flutters, then goes dark; Cont lamp for the specified Trunk Group Select button remains lighted—operation denied; return to Step 1.

Attendant Direct Trunk Group Selection

This feature allows the attendant to select a trunk group for an outgoing call, loudspeaker paging zone, or code calling zone by pressing a Trunk Group Select button. The procedures for activating this feature are incorporated into all the calling procedures that require trunk access. Each attendant console has 12 Trunk Group Select buttons. (In Generic 1 only, feature buttons may also be used as Trunk Group Select buttons. This allows up to 24 Trunk Group Select buttons on a console.) In a Generic 1 system, up to 12 feature buttons may be used as additional Trunk Group Select buttons on each console, limit 24 per console.

4-5