AT&T G3 manual Is the connector on the first serial port of the PC a

Planning Connectivity

Cables and Connectors

Step	Action
1	Is the connector on the first serial port of the PC a
	9-pin connector?
	■ If yes, go to step 3.
	■ If no, go to step 2.
	Hint: PC ports are labeled with the port number and
	type (serial or parallel).
2	Is the connector on the first serial port of the PC a
	25-pin connector?
	■ If yes, connect the female end of the RS232 cable
	to the male connector of the PC's serial port.
	■ If no, go to step 3.
3	On the modem or data module, connect the male end
	of the RS232 cable to the female 25-pin RS232
	connector.
	On an ADU, connect the cable-end you configured to
	the ADU.
4	Go to To Validate Dial Strings.

5-28Issue 2 April 1996