UnixWare Installation

To Configure the Ethernet Interface

To Configure the

Ethernet Interface

Introduction You configure the Ethernet interface for the Proxy Agent when you set the ifconfig options in the UNIX system.

When to use Configure the Ethernet interface after you set the system name for the Proxy Agent PC.

Materials You need the following information to configure the Ethernet

needed interface:

The IP address for the Proxy Agent PC.

The system name as it appears on the PA001 form.

Your network’s configuration, including the netmask for your local network. (See your network administrator if you need help.)

UNIX

Use the following steps to configure the Ethernet interface.

commands

 

 

 

 

 

 

Command

Description

 

 

 

 

ifconfig

Assigns an address to a network interface and

 

 

configures the interface’s parameters.

 

 

 

 

netmask

Determines which part of your network address

 

 

is used as a network ID and which part is used

 

 

as the Proxy Agent ID.

 

 

 

Issue 2 April 1996 3-13

Page 53
Image 53
AT&T G3 manual To Configure Ethernet Interface, Commands Description