Alarms
Set Modem Options for Alarm Reception
Procedure 2: Start at the UNIX prompt.
2224 CEO modem
Step | Action |
1 | Use a UNIX editor to open the following file: |
| etc/uucp/Devices |
|
|
2 | Add (or edit) the following line: |
| ACU term/a01m, - 1200 direct_modem |
|
|
3 | Write and quit the file. |
|
|
4 | Enter the following command: |
| cu |
|
|
5 | Connect to the modem and reset the software options |
| to their default settings. |
|
|
6 | On the front panel of your modem, set dip switch #6 to |
| the up position. |
|
|
7 | Enter the following modem options: |
| od |
| o2=n |
| o1 2=y |
| o34= 1 |
| o36=0 |
| o41=0 |
8On the front panel of your modem, set dip switch #1 to the up position.
Hint: Dip switches 1 and 6 are now in the up position. All others must be in the down position.
End
Issue 2 April 1996
