UnixWare Administration
To Assign Devices to Ports
To Assign Devices to
Ports
Introduction You need to assign devices (terminals and modems) to the ports on your system so that the port monitors can recognize them.
When to use Assign devices to ports after you have installed UnixWare.
Procedure Use the following steps to assign a terminal or a modem to a port:
Step Action
1Enter the following command at the UNIX prompt:
/usr/sbin/sysadm
Result: The OA&M Operations, Administration and Maintenance menu displays.
2Open the Quick Terminal Setup screen.
Hint: Select the following options to navigate through the
OA&M screens:
At this screen . . . | Select this option . . . |
OA&M Operations, | ports |
Administration and |
|
Maintenance |
|
|
|
Service Access Management | |
|
|
Quick Terminal Setup | add |
Issue 2 April 1996
